Compatibility between Sony's high-end DAP ZX series and our various cables that use 4.4mm plugs (as of December 2024)
Thankfully, we have received many orders for various cables that use 4.4mm plugs.
On the other hand, we also receive many inquiries about compatibility and special orders not listed in the catalogue, and in particular many inquiries about connecting Sony's ZX series to stationary devices.
Regarding this, the conclusion is that it is best to assume that connection is not possible.
The very popular NW-ZX707
Source: SONY official website
https://www.sony.jp/walkman/products/NW-ZX707/
▼MOGAMI 2534 Y-cable (4.4mm 5-pole male - RCA x 2)
▼MOGAMI 2534 Y-cable (4.4mm 5-pole - TRS male x 2)
▼MOGAMI 2534 Y-cable (4.4mm 5-pole male to 2 XLR males)
To product page>>
These products are not compatible with connecting SONY DAPs and amplifiers, etc.
The 4.4mm 5-pole plug was established under the initiative of Sony, but currently there are differences between Sony and other companies in the wiring and output methods. While many manufacturers describe 4.4mm as a balanced output terminal, Sony describes it as a headphone terminal.
The instruction manual also states, " Please connect passive type headphones that support balanced connection. Connecting to the line input terminal of another device may cause a malfunction ."
For this reason, we do not recommend combining our cables that use 4.4mm plugs with Sony's ZX series cables to connect to amplifiers, car decks, etc.
It's not as simple as just opening it up and it will work; the amplifier needs to be compatible.
Some customers have reported that certain combinations have worked in the past, but this is only possible if the device is compatible, so it does not mean that the amplifier will sound or work exactly as you plug in the cable.
In fact, we have received information that in many cases no sound comes out (possibly due to a short circuit) or noise is heard.
In our company, we once had a DAC that overheated and was damaged while we were testing a different cable connection method.
Depending on the wiring combination, the same risk exists not only with Sony products but also with products from other companies.
Even with all of the above in mind, I understand that as an audio fan, you still want to enjoy the deep, rich sound of the ZX series on a stationary device, but please be aware that there is a risk of damage and that if you use it, you do so at your own risk.
The production itself is possible with an assignment for SONY, so if you'd like to take on the challenge, please contact us.
Since our products are made to order, we do not accept returns due to compatibility issues, so please make sure your device is compatible before purchasing, regardless of whether it is for SONY.
If you have any questions, please contact us before purchasing and we will answer to the best of our ability.
