Soldering Q&A
All our products are soldered in-house.
Some people contact Amazon and other sites to confirm that they are genuine finished products.
All our products are soldered and manufactured in-house. On Amazon, genuine finished products and our own manufactured products are mixed, but this is because Amazon's listing regulations state that if all the parts, such as the cable, are the same, they are considered to be the same product.
Therefore, please understand that we are not selling these products in order to induce people to buy them by mistake, thinking they are genuine products. Please also refer to the following.
Also, as mentioned above, all of our finished products are not manufacturer products.
Please think of us as a soldering and assembly agent only.
We will not accept any claims regarding performance, such as not achieving the figures published by the manufacturer.
Please take full responsibility for all use, including how you use it.
About Imohanda
Those who have read the book below will know that when Mr. Nose from Fudesha held a soldering seminar, many of the engineers from leading manufacturers said that pot solder was "good solder."
※Partial quote
Not to jump on the bandwagon, but our shop has also disassembled other cables and looked at the solder side, and half of them were not what you would call good.
Our shop uses soldering irons with a high thermal recovery rate, and our soldering workers produce more than 15 pieces a day.
After soldering, the flux on the connection points is removed with alcohol, and since the contacts may also be dirty, we clean them with alcohol and check the electrical connection before shipping the product.
Some people may be concerned about the simple packaging, but we ask for your understanding as we aim to provide quality products at low prices.
For those who want to make their own, we recommend the following books:
This content is ideal for intermediate learners.
Our solder side is attached on the right side of the photo.
I'm sorry the image is a little rough.
We carry out quality control in-house to prevent the solder from becoming lumps (potato solder balls) like in the photo.
We hope you will use this as a reference when making your purchasing decision.
How to choose a soldering company
It is important to choose which cable to purchase after reading the above text.
I think it can be difficult to decide which store to buy from when shopping online because you can't see what's inside.
Since soldering is something you can do yourself if you purchase the parts, I think it's best to buy them from a reputable store.
Therefore, if the following conditions are met, there is a high chance that the restaurant is of good quality.
◯ We make various cables (guitar, microphone, RCA, stereo, etc.)
◯We also manufacture cables whose coating is easily melted (except for BELDEN and CANARE).
Guitar shields are all relatively easy to make because they have only one core. For that reason, they are sold by various stores on Amazon.
However, the number of stores selling 4-core cables, microphone cables, RCA cables, stereo phone cables, etc. is significantly fewer because these cables require more skill.
Before opening this shop, when I personally purchased cables I always took the above information into consideration.
I hope this information will be helpful to customers in choosing a good restaurant.